Hdd Heat Shrink Wrap Sleeves

HDD Reinforced Shrinkable Materails 3LPE Shrink Sleeves Materials Manufactory

$ 1 /Set/Sets

Min. Order: 100 Set/Sets

Quantity:

place of originChina
Plastic molding process typeExtruding
Processing ServiceMoulding, Cutting
Sleeve Backing thicknessMore than 1 mm
PE Backing Density≥0.95 gm/cc
Hardness of PE backing≥55 Shore D
Ring and Ball Softening Point of adhesiv≥90°C
Lap Shear Strength of adhesive> 0.35 MPa (50 psi) @ 60°C
Peel Strength of installed sleeve> 2 N/cm

Contact Now

Description

"""Quality first, Honesty as base, Sincere service and mutual profit"" is our idea, in order to develop continuously and pursue the excellence for HDD Reinforced Shrinkable Materails 3LPE Shrink Sleeves Materials Manufactory Thus far our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers which are sought after simply by targeted traffic. We all highly imagine that now we've got the full capacity to current you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very severely promise:Csame top quality better price; exact same selling price higher quality.

Specification

Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,DDU,Express Delivery
Min. Order: 100
Transportation: Ocean,Land,Air,Express
Port: Shanghai,Shenzhen,Qingdao
Model No.: HT60
Brand: caepforever
place of origin: China
Plastic molding process type: Extruding
Processing Service: Moulding, Cutting
Sleeve Backing thickness: More than 1 mm
PE Backing Density: ≥0.95 gm/cc
Hardness of PE backing: ≥55 Shore D
Ring and Ball Softening Point of adhesiv: ≥90°C
Lap Shear Strength of adhesive: > 0.35 MPa (50 psi) @ 60°C
Peel Strength of installed sleeve: > 2 N/cm

Shipping

Packaging: carton
Transportation: Ocean,Land,Air,Express

Certificate

EXHIBITION

Science is infinite,Research are Forever” CAEP FOREVER established a city named "China Science City" in September 2000, which is located in Mianyang, Sichuan Province, China.

Forever is the birthplace of China's radiation crosslinking materials

Field joint coating failure has been known for site of corrosion damage in many gas transmission pipelines.

CAEP”, The Ninth Scientific Research Institute established in China, founded in 1958

National Rradiation Crosslinking Heat Shrinkable Material Technology Center,

pipeline radiation crosslinking heat shrinkable material technology has been extended to most of China's pipeline radiation crosslinking heat shrinkable manufacturers.

WE DO AMAZING STUFF

APPLICATION

DN 2600

China Petrol

Make Heating on the adhesive surface of closure patch

Remove the plastic film and lining paper on the heat shrinkable sleeve.

Make heating on the adhesive surface at the other end with fire

FAQ

What's the meaning for crosslinked polyolefin backing?

The radiation cross-linked polyethylene heat shrink tape consists of a three-layer structure, consisting of a substrate layer, a hot melt adhesive layer, and an epoxy primer layer from top to bottom. It is formed by hot pressing to form a whole, with the substrate layer being a polyethylene layer and the hot melt adhesive layer being a polyurethane type hot melt adhesive layer. Radiation crosslinking improves the water vapor sealing performance of the substrate, the adhesion of hot melt adhesive, the corrosion resistance of chemical media, and the cathodic stripping resistance of epoxy primer.

What's the difference for 2PE HSS and 3PE HSS heat shrink sleeves?

2PE is HSS without epoxy primer layer, 3PE HSS with epoxy primer layer

Is radiation cross-linked heat shrink tape sold in rolls or sets？

If as a set, Heat shrink sleeves size depends on the diameter of the steel pipe, epoxy primer and closure patch should be suitable for pipe diameter.If as rolls,popular size is 30M length, customers can cut the length according to their actual on-site needs.